Features include 7 inch colour LCD screen with easy to use interface, two independent channels and controls, 100Mhz bandwidth and 25MHz waveform generator, and an auto scale function that detects sine and square waves automatically. 14 trigger modes include Edge, Pulse, Video, Slope, Overtime, Window, Pattern, Interval, Under Amp, UART, LIN, CAN, SPI, and IIC, and 5 serial protocol triggers and decodes include RS232/UART, I2C, SPI, CAN, and LIN. Other features include two 3-digit digital voltmeters, and 6-digit hardware frequency indicator. It also boasts 32 kinds of auto measurements with statistics, real-time statistics of maximum, minimum, standard deviation, etc. Connect and control directly from a computer, or plug in a USB thumb drive to save oscilloscope setups, waveforms, reference waveforms, CSV files and images. Mains powered. Supplied with 10:1 passive probe with 1.5m lead, 2 x BNC to clip test leads, USB cable, and power lead.
8M memory depth (single channel)
Waveform generator
Abundant SCPI remote command control
USB Host/Device
Dual window mode
32 auto measurements
5 serial protocol triggers and decodes
Two digital voltmeters
Display: 7 inch TFT
Resolution: 800 x 480 pixels
Display type: Point, vector
Interface: USB Host, USB device
Sampling rates: Up to 1GSa/s
Vertical range: 2mV/div ~ 10V/div
Vertical resolution: 8bit
Waveform generator: Sine, square, ramp, exponential, noise, DC
Weight: 1.9kg
Dimensions: 318(L) x 150(H) x 110(W)mm
