eSUN Blue PLA+ Filament 1kg 1.75mm

The all new eSUN PLA+ filaments are suitable to use on your FDM (Fused Deposition Modeling) 3D printer with little to no change to your regular PLA settings.

PLA+ (modified PolyLactic Acid) is extracted and purified from corn grain for an environmentally friendly composition. It is low odour and users report a slight, sweet aroma while printing.

Features

• Good balance of strength, rigidity and toughness for strong impact resistance.
• 100% bio-degradable and FDA food safety approved.
• Ready to print on any open source desktop or industrial printer.
• Low shrinkage rate means a uniform diameter so you won't get any cracking or issues being brittle.
• Up to ten times stronger than standard PLA.
• Delivers exceptional performance consistently.
• The easiest to work with and most importantly USER FRIENDLY!

Printer Settings

• Best Printing Temperature：200-220℃.
• Bed Temperature：0-70℃.
• Printing Speed：30~90mm/s.
• Movement Speed ：90~150mm/s.