10A Double GPO Power Point with In-built RCD
10A Double GPO Power Point with In-built RCD
- CAT.NO: PS4048
1/3
$73.90
Bulk Pricing
Qty 1 - 9
$73.90 / Unit
Qty 10 - 49
$65.90 / Unit
Qty 50 +
$58.90 / Unit
Store
Choose a store for stock availability
10A Double GPO Power Point with In-built RCD
$73.90
Designed to be a direct replacement for your standard GPO fittings, combining two standard 240AC 10A mains (GPO) outlets with a built-in RCD to provide protection against electrical shock. In the event of a fault with the connected appliance or accident, such as cutting through the mains lead, the unit will provide complete isolation from mains. A test button, status indicator, and reset button allows you to check the RCD, which we recommend should be done each time before use.
Meets Australian and New Zealand safety standards.
Please Note: This item should be installed by a licenced electrician.
Features:
- Electric shock protection
- LED status indicator
- Reset and test buttons
- Line power indicator
Specifications:
Specifications:
CD Classified: Type II
Rated Tripping Current: 30mA
Operating Speed: <40mS Max.
L/Nin-L/Nout: 2KV
Endurance: 2000 Cycles Minute
Contact Break: Double Pole
Standards: RCD Module-AS NZS 3190, Socket-AS NZS 3112
Minimum Back Box Depth: 35mm
Fixing Screws: M3.0 x 25mm
Cable Capacity: 4x2.5mm2,2x4mm2,1X6mm2
AC Voltage Rating
AC Voltage rating
240.0 V
AC Frequency
50.0 Hz
AC Current Rating
AC current rating
20.0 A
Plug or Socket
Device
Socket
Plug or Socket Type
Mains AU/NZ 3 Pin
Dielectric Withstanding Voltage
6.0 kV
Ingress Protection Rating
Dust/Particle Ingress Protection
3 - Objects > 2.5mm, Tools, thick wires etc
Liquid/Moisture Ingress Protection
0 - Not protected
IP Rating
30.0
Product Dimensions
Width
120.0 mm
Height
76.0 mm
Depth
50.0 mm
Weight
144.0 g
Packaged Dimensions
Packaged Dimensions
14.7cm(Length) x 8.1cm(Width) x 5.6cm(Height)