Keeping safe on a worksite, or attracting attention to your vehicle at an event - whatever your purpose - this multi-pattern strobe is versatile and couldn’t be easier to install. Two strong magnets hold it firmly in place on your roof and a 3.2m cable to cigarette lighter plug means you can power it without any special wiring. Inside the protective plastic case are 24 high power amber LEDs - 6 banks of 4LEDs each to be precise. There are 10 different display patterns, so you can select the most attention-grabbing one for your situation. Modes include clockwise / anticlockwise rotation, side to side, fade in/out, and more. Two rubber feet on the bottom of the unit cover powerful magnets and protect your paintwork. If you prefer to mount it permanently however, they unscrew for a clean, flush mount. The cigarette lighter plug incorporates an on/off switch with LED power indicator, as well as a switch for selecting the display mode. Of course, please make yourself aware of any local laws for using external lighting on vehicles, on and off public roads.
There are 10 available flash patterns.
| |
| 1 | Rotating |
| 2 | Burst, Fade In-Out/Solid, Fade In-Out |
| 3 | Random |
| 4 | Burst, Alternating (Side to Side) |
| 5 | Burst, Alternating, Diagonal (Front to Back) |
| 6 | Burst, Dual Rotating |
| 7 | Burst Hold / Burst Side to Side |
| 8 | Burst Hold / Single Hold |
| 9 | Burst, Single Rotating |
| 10 | Burst, Single Rotating |
Note: Press pattern button 0.5 seconds for next pattern.
