eSUN Yellow PETG Filament 1kg 1.75mm

The eSUN PETG (PolyEthylene Terephthalate Glycol-modified) filaments are stronger than regular PLA, having similar properties to that of ABS without necessitating a temperature controlled print chamber. It's widely used for it's temperature resistance and has the added benefit of being food safe.

Features
• Higher temperature resistance and strength than PLA, easier to use than ABS. 
• Low shrinkage rate means a uniform diameter and no cracking or brittle issues.
• Ready to print on any open source desktop or industrial printer.
• Delivers exceptional performance consistently.

Printer Settings
• Best Printing Temperature：230-250℃. (240℃ recommended).
• Bed Temperature：75-90℃. (80℃ recommended).
• Printing Speed：40~100mm/s. (60mm/s recommended).
• Movement Speed：90~150mm/s.