1/2
Discontinued
$25.16$69.90
Save $44.74
Store
Choose a store for stock availability
Mini-D 2 x 10W Class-D Amplifier Kit
$25.16
This compact amplifier can deliver 10W per channel stereo or 30W mono, and is powered by DC so it could be used for busking running of a battery. Output power depends on operating voltage (8 to 25VDC) speaker impedance (4 to 8 Ohm) used. With a 12VDC supply it can deliver 7.5W per channel into 8-ohm speakers or 2 x 15W into 4-ohm loads. Being highly efficient there is no need for a heatsink!
Features:
- Up to 91% efficient
- Selectable gain
- On-board volume control
- Low-power shutdown mode
- Over-temperature, over-current, short circuit and speaker protection.
Supplied with double sided, solder-masked and screen-printed PCB, and ALL SMD components pre-soldered to the PCB to save you the hassle of soldering them yourself.
Features:
- Up to 91% efficient
- Selectable gain
- On-board volume control
- Low-power shutdown mode
- Over-temperature, over-current, short circuit and speaker protection.
Supplied with double sided, solder-masked and screen-printed PCB, and ALL SMD components pre-soldered to the PCB to save you the hassle of soldering them yourself.
Kit
Kit Form
Short Form (circuit only)
Tools required
Soldering Station
Estimated Construction Time
30.0 min
Difficulty
Detailed
Contains High Voltage Components
false
Instructions Included
false
PCB Width
46.0 mm
PCB Length
85.0 mm
Audio Kit
Output power
10.0 W
Output impedence range
8.0 Ω
Packaged Dimensions
Packaged Dimensions
20.0cm(Length) x 10.0cm(Width) x 3.0cm(Height)