Universal Pre-Punched Experimenters Board - Large
Universal Pre-Punched Experimenters Board - Large
- CAT.NO: HP9554
Bulk Pricing
Available variants (3)
Deliver to
Store
The low cost way to build prototypes. Each donut is separated from its neighbours by about a 0.5mm gap. This effectively isolates each pad but also makes it easy to bridge solder across to make interconnections. Each board also has `fingers' on opposite ends with a 3.6mm edge pitch. These can be used to connect to and from the board or to a card edge connector. Finally the non- solder side of the board has an alpha- numeric grid printed on it to assist in component identification board layout.
Board type
Doughnut
PCB hole spacing
2.54 mm
PCB hole number
1608.0 pc
Length
78.0 mm
Width
210.0 mm
Packaged Dimensions
21.0cm(Length) x 7.8cm(Width) x 0.2cm(Height)
Discover more
Universal Pre-Punched Experimenters Board - Small
CAT.NO: HP9550
Available for delivery
Universal Pre-Punched Experimenters Boards - Medium
CAT.NO: HP9552
Available for delivery
IC Experimenters Board - 140 x 95mm
CAT.NO: HP9558
Available for delivery
Ultra Mini Experimenters Board
CAT.NO: HP9556
Available for delivery
Unclad Punched Laminate - 150 x 70mm
CAT.NO: HP9562
Available for delivery
PC Boards Vero Type Strip - 95mm x 75mm
CAT.NO: HP9540
Available for delivery
Purchased Together
Third Hand PCB Holder Tool with 4 Clips and Magnifier
CAT.NO: TH1993
Available for delivery
Low Cost Gas Soldering Iron
CAT.NO: TS1111
Available for delivery
1mm Duratech Solder - 200gm
CAT.NO: NS3010
Available for delivery