12V/24V 30A MPPT Solar Charge Controller with LCD display
12V/24V 30A MPPT Solar Charge Controller with LCD display
- CAT.NO: MP3743
Store
NOTE: This product has been replaced by MP3768. Click here for the replacement
This intelligent compact charger uses Maximum Power Point Tracking (MPPT) for maximum efficiency and charge rate. It can charge 12V or 24V lead acid (sealed, gel, or flooded) or 12V lithium battery banks, and supports 12V solar arrays up to 500W or 24VDC arrays up to 1000W. It features eight timer programs, three stage charging including constant voltage charging, and a backlit LCD to diplay real-time feedback on battery voltage, load voltage, PV voltage, time, etc. An external temperature probe is also supplied to adjust the float voltage according to the temperature when charging SLA batteries. The integrated Wi-Fi enables you to remotely access the controller using an app on your Smartphone to keep an eye on the system, and two USB ports are provided to charge your USB gadgets. The fanless design is built into a durable case for permanent installation with heavy-duty screw terminals for cabling up to 10AWG. Safety features include over-voltage, low-voltage protection, reverse connection, short-circuit, over-current, and over-temperature protection.
Features:
• Intelligent and optimum MPPT charging algorithm
• Backlit LCD with real-time energy stats, operational and fault message
• Temperature sensor for battery charging compensation
• Low-voltage disconnect/reconnect
• 3-stage charging
• 8 programmable timers
• Backlit LCD screen
• Integrated Wi-Fi
• 2 x USB Ports
Battery support:
• Sealed, gel or flooded Lead Acid (12V/24V)
• LiFePO4 (12V)
Specifications:
Input Voltage Range: 16 ~ 80V
Battery Type: Lead acid (Sealed, Gel, Flooded, AGM, Lithium)
Constant Voltage Charging Voltage:
Lead-acid: 14.4V/28.8V
Lithium: 14.5V
AGM: 14.6V/29.2V
Recommended Battery capacity: 30Ah+
Typical Idle Consumption: 160mA max.
Load Recover Voltage: 12~13V/24~26V
Max Solar Panel Array
500.0W,1000.0W
Max PV Open Circuit Voltage
100.0 V
Max Charging Current
30.0 A
Charge Controller Technology
Maximum Power Point Tracking (MPPT)
Operating Temperature
-10.0°C-40.0°C
DC Voltage
12.0V,24.0V
Total Current Rating
3.0 A
Number of Ports
2.0 pc
Width
238.0 mm
Height
177.0 mm
Depth
63.0 mm
Weight
1.5 kg
Packaged Dimensions
27.0cm(Length) x 23.0cm(Width) x 10.0cm(Height)
Discover more
Not available for delivery
Not available for delivery
Not available for delivery
4 Stage 6/12V 4A Battery Charger with LCD Display
CAT.NO: MB3611
Not available for delivery
12V/24V 30A PWM Solar Charge Controller with LCD display for lead acid and Lithium batteries
CAT.NO: MP3755
Not available for delivery
12V-7.2A/24V-3.6A 9 State Charger
CAT.NO: MB3613
Not available for delivery
Dual Input 20A DC/DC Multi-Stage Battery Charger to suit Lead and Lithium Style Batteries
CAT.NO: MB3940
Limited stock for delivery
12V/24V/36V/48V 50A MPPT Solar Charge Controller with LCD display for lead acid and Lithium batteries
CAT.NO: MP3745
Not available for delivery
Purchased Together
12.8V 7.5Ah Lithium Deep Cycle Battery
CAT.NO: SB2201
Not available for delivery
12.8V 100Ah Lithium Deep Cycle Battery GEN1
CAT.NO: SB2203
Not available for delivery
12.8V 150Ah Lithium Deep Cycle Battery
CAT.NO: SB2244
Limited stock for delivery