12V/24V/36V/48V 50A MPPT Solar Charge Controller with LCD display for lead acid and Lithium batteries
12V/24V/36V/48V 50A MPPT Solar Charge Controller with LCD display for lead acid and Lithium batteries
- CAT.NO: MP3745
Deliver to
Store
NOTE: This product has been replaced by MP3749. Click here for the replacement
This high current charger uses Maximum Power Point Tracking (MPPT) for maximum efficiency and charge rate. It can charge 12V, 24V, 36V or 48V lead acid (sealed, gel or flooded) or 12V lithium battery banks, and supports 12V solar arrays up to 700W or 24VDC arrays up to 1400W. It is recommended for battery capacities 50Ah and above, and features three timer programs, three stage charging, including constant voltage charging, and a backlit LCD to diplay real-time feedback on battery voltage, load voltage, PV voltage, time, etc. An external temperature probe is also supplied to adjust the float voltage according to the temperature when charging SLA batteries. The integrated Wi-Fi enables you to remotely access the controller using an app on your Smartphone to keep an eye on the system, and two USB ports are provided to charge your USB gadgets. The fanless design is built into a durable case for permanent installation with heavy-duty screw terminals for cabling up to 6AWG. Safety features include over-voltage, low-voltage protection, reverse connection, short-circuit, over-current, and over-temperature protection.Â
Features:
• Intelligent and optimum MPPT charging algorithm
• Backlit LCD with real-time energy stats, operational and fault message
• Temperature sensor for battery charging compensation
• Low-voltage disconnect/reconnect
• 3-stage charging
• 3 programmable timers
• Backlit LCD screen
• Integrated Wi-Fi
• 2 x USB Ports
Battery Support:
• Sealed, gel or flooded Lead Acid (12V/24V/36V/48V)
• LiFePO4 (12V)
Specifications:
Nominal System Voltage: 12/24/36/48VDC
Rated Current: 12/24V: 50A, 36V: 35A, 48V:25A
Max Input Power: 700W/12V, 1400W/24V
Battery Type: Lead acid (Sealed, Gel, Flooded, AGM, Lithium)
Constant Voltage Charging Voltage:
 Lead-acid: 14.4V/28.8V/43.2V/57.6V
 Lithium: 14.5V
 AGM: 14.6V/29.2V/43.8V/58.4V
Recommended Battery capacity: 50Ah+
Typical Idle Consumption: 160mA max.
Load Recover Voltage: 12~13V/24~26V/36~39V/48~52V
Max Solar Panel Array
700.0W,1400.0W
Max PV Open Circuit Voltage
135.0 V
Max Charging Current
50.0 A
Max Load Current
50.0 A
Charge Controller Technology
Maximum Power Point Tracking (MPPT)
Operating Temperature
-10.0°C-40.0°C
Dust/Particle Ingress Protection
3 - Objects > 2.5mm, Tools, thick wires etc
Liquid/Moisture Ingress Protection
0 - Not protected
IP Rating
IP30
DC Voltage
12.0V,24.0V,36.0V,48.0V
DC current rating
50.0 A
Total Current Rating
3.4 A
Number of Ports
2.0 pc
Input Type
Screw Terminal
Input Connection
Terminal
Output Type
Screw Terminal
Output Connection
Terminal
Width
238.0 mm
Height
177.0 mm
Depth
63.0 mm
Weight
2.3 kg
Packaged Dimensions
23.6cm(Length) x 27.3cm(Width) x 11.3cm(Height)
Discover more
Available for delivery
Available for delivery
Not Available for delivery
12V-7.2A/24V-3.6A 9 State Charger
CAT.NO: MB3613
Not Available for delivery
12V/24V 30A PWM Solar Charge Controller with LCD display for lead acid and Lithium batteries
CAT.NO: MP3755
Not Available for delivery
4 Stage 6/12V 4A Battery Charger with LCD Display
CAT.NO: MB3611
Available for delivery
12V/24V 30A MPPT Solar Charge Controller with LCD display
CAT.NO: MP3743
Not Available for delivery
Purchased Together
12.8V 100Ah Lithium Deep Cycle Battery GEN1
CAT.NO: SB2203
Not Available for delivery
12.8V 7.5Ah Lithium Deep Cycle Battery
CAT.NO: SB2201
Not Available for delivery
12.8V 150Ah Lithium Deep Cycle Battery
CAT.NO: SB2244
Available for delivery